Skip to content

Garages & shops

Metal Shops & Garages Built in Greater Houston

A steel shop or garage gives you a clear-span building with no posts in the way, roll-up doors sized to your trucks and equipment, and a frame engineered for Houston’s wind loads. We build them from 30x40 garages to 50x100 shops, turnkey or erection-only.

Get a Free QuoteCall (832) 000-0000

Who it’s for

Who is a steel shop or garage right for?

  • Homeowners who need real space

    A detached garage for two trucks, a workshop with a bench and a lift, or both under one roof, built to match the house where your HOA asks for it.

  • Acreage owners

    A big shop is usually the first building on new land: equipment, a tractor, a boat and a place to work while the house is planned.

  • Trades and small businesses

    Contractors, mechanics and fabricators who want a shop bay with an office, restroom and drive-through doors.

  • Car and hobby collectors

    Insulated, climate-ready shops with tall doors, a lift-height eave and room for a mezzanine.

Red-iron gable frames and purlins of a large steel building on a rural lot, with a yellow telehandler parked inside the frame
Clear-span gable frame going up on open acreage

Common sizes

What size shop or garage do I need?

Sizes are examples, not inventory. Every building is engineered to your exact width, length and eave height.

  • 30 × 40

    1,200 sq ft

    Two-car garage with a workbench wall

  • 40 × 60

    2,400 sq ft

    Our signature shop: trucks, a boat and a full work area

  • 50 × 80

    4,000 sq ft

    Equipment shop with a bay for a camper or tractor

  • 50 × 100

    5,000 sq ft

    Business shop with office, restroom and multiple bays

Popular options

What options can I add?

  • Roll-up doors

    Sized to what you park. A 12x12 or 12x14 door handles most trucks and trailers. Insulated sectional doors are available.

  • Walk doors

    3070 steel walk doors with lever locks, plus panic hardware for commercial shops.

  • Windows

    Insulated windows placed for daylight over the bench, or to match the house.

  • Insulation

    Faced fiberglass blanket or a spray-foam upgrade to fight condensation in Houston humidity.

  • Wainscot

    A contrasting lower wall band in a second color, or masonry, so the shop looks finished.

  • Lean-tos

    Covered side bays for a trailer, firewood or an outdoor work area, designed into the main frame.

  • Porches & overhangs

    Gable or eave extensions for shade at the doors and a cleaner roofline.

  • Eave height

    14–16 ft eaves fit a car lift or a camper door. 12 ft is fine for a standard garage.

Pricing

What affects the cost of a shop or garage?

Footprint and eave height
Square footage drives steel weight. Raising the eave 2 ft adds wall panel and column steel.
Doors
Large roll-up and insulated doors are among the biggest line items. Each one also adds framed openings.
Insulation
Moisture control is worth it in Houston, but spray foam costs much more than blanket insulation.
Foundation
Slab thickness, perimeter beams and any pad build-up depend on soil and site.
Site prep
Clearing, fill and a level pad can be a large share of a rural build.
Finish-out
Electrical, lighting, plumbing, an office or a mezzanine are priced separately from the shell.

Why build a shop in steel instead of wood?

A pre-engineered steel building gives you a clear span with no interior posts, so you can open every door and swing a truck around inside. The frame does not rot, warp or attract termites, which all matter in the Gulf Coast humidity.

Because the building is engineered for your exact size and site, it comes with stamped drawings that show the wind and roof loads. That is what your permit office and insurer want to see. Read more in the metal building cost guide.

Turnkey shop or erection only?

If you already bought a kit, we can erect it with our own crew. If you are starting from an idea, our turnkey design-build service covers design, engineered drawings, the slab, the steel and the trades, with one point of contact from quote to handoff.

Our process

How does the process work?

Five steps from a free site visit to handing you the keys, with one point of contact the whole way.
See the full process

  1. Step 1

    Free consult & site visit

    We walk your site, measure, and talk through how you’ll use the building.

  2. Step 2

    Design & engineered quote

    You get a written quote with the size, options and a clear scope of work.

  3. Step 3

    Permits & foundation

    Stamped drawings go to permitting while we prep the site and pour the slab.

  4. Step 4

    Steel erection

    Our own crew sets the frames, sheets the building and installs doors and trim.

  5. Step 5

    Walkthrough & handoff

    We walk the building with you, finish the punch list and hand over the documents.

FAQ

Garages & Shops questions

What size metal shop should I build?

Measure what you will park and add working room. Most people who start with a 30x40 wish they had built bigger, which is why a 40x60 with 14–16 ft eaves is our most requested shop. It fits two vehicles, a boat or trailer, and a full bench area.

How much does a 40x60 metal shop cost in Houston?

It depends on height, doors, insulation, foundation and site work. Our cost guide shows sample price-per-square-foot ranges for kit-only, erected and turnkey builds. We give you a written quote after a free site visit.

How tall should my shop be for a car lift?

A 14 ft eave is a common minimum for a two-post lift with headroom. Go to 16 ft if you also want a tall roll-up door for a camper or box truck.

Can a steel shop look like it belongs next to my house?

Yes. Wainscot, matching trim and roof colors, porches and window placement make a big difference, and many HOAs approve steel buildings that coordinate with the home.

Do I need a permit for a shop?

Usually, yes, from your city or county depending on where you build. We confirm the right office for your address and provide the engineered drawings. See our guide on metal building permits in Harris, Fort Bend and Montgomery counties.

Keep exploring

Related buildings & services

Where we build shops and garages near Houston

See every area we serve

Free on-site quote

Get a free quote on your shop or garage

Four quick fields and we’ll call you within one business day to set up a free site visit.

  • (832) 000-0000
  • Mon–Sat 7 AM–6 PM · Quotes answered within one business day

Or call (832) 000-0000